|
|
|
| |||
|
Deluxe FSD Cooler Package
Give your electronically injected 6.5 increased reliability and better serviceability!
Kit includes everything you need: FSD Cooler, New FSD(PMD module), Calibration resistor #5 (#9 optional), and remote extension harness. Individual items available separately below. "Please print the installation instructions from my web site." -JK "It is my recommendation to start fresh with a new driver on the cooler and to remove the entire unit from the influences of direct radiating engine heat. By using the Deluxe FSD Package you are giving your DS-4 pump and driver module the best chance at a long life and starting fresh with new components that have never been exposed to heat." - JK |
|
FSD Cooler only
"I strongly advise starting fresh with a new driver and remote location with our extension harness to get the most reliable service." - JK "Please view or print the installation instructions from my web site." -JK |
|
FSD extension Harness for remote installation
"This item is offered for purchase only through the online store." This cable allows relocation of FSD cooler assembly away from the radiant heat and vibration of the engine. Provides weather tight seal for positive connection. Available in 40" and 72" lengths at same price. Just note in comments when order is placed. Default length is 40" which is plenty long enough for 99% of the mounting locations. |
|
FSD Module only
|
|
Fuel System Calibration Resistor #5
Available in values of 1-9, but stocked in #5 and #9. These resistors are used by the pump assembler to fine tune the fuel delivery rate. For performance applications where gauges are used to monitor exhaust temps, a #9 will provide a slight increase in fuel delivery. For most applications, a #5 is recommended. Please specify value required when ordering
"Due to the fact that the engine computer looks up and stores this information indefinitely, ANY adjust on the fly fuel controller will do ABSOLUTELY NOTHING! Aside from that, with a range of 4 steps above the std #5 combined with a .5mm change in fuel delivery you can only get a 2mm increase which is quite insignificant"... - JK |
|
|
Fuel System Calibration Resistor #9
Available in values of 1-9, but stocked in #5 and #9. These resistors are used by the pump assembler to fine tune the fuel delivery rate. For performance applications where gauges are used to monitor exhaust temps, a #9 will provide a slight increase in fuel delivery. For most applications, a #5 is recommended. Please specify value required when ordering
"Due to the fact that the engine computer looks up and stores this information indefinitely, ANY adjust on the fly fuel controller will do ABSOLUTELY NOTHING! Aside from that, with a range of 4 steps above the std #5 combined with a .5mm change in fuel delivery you can only get a 2mm increase which is quite insignificant"... - JK |
|
|
SOL-D Fuel Solenoid Driver for 6.5 trucks
"While this product promises to be an excellent fix for the DS4 pump, it simply has not been in service long enough to prove itself. Having witnessed some early failure issues, I have chosen to wait until the product has a proven track record rather than stake my reputation on it at this time. If the product proves to be durable and trouble free I will reconsider endorsing it at a later time. In the mean time, the FSD cooler and Deluxe FSD pkg have proven to greatly minimize the issues found with the DS4 pump and I will continue to endorse this product." - JK |
This item is backordered. Please check back later.
|
|