6.2/6.5 GM
Cummins Power
Duramax Parts
Duramax Performance
Fuel Treatments
Gauges and Mounts
Kennedy Custom
Powerstroke
Suspension
Transmission
Truck Accessories
Order Amsoil Products
Return Policy
Check Order
Or enter a keyword
View My Cart

Oil Pan Heaters

Click for larger view

Click for larger view

Pro Heat Pad

Pro Heat Pad Installed

Click here for a pictorial guide to a typical Duramax install

Why Pro Heat?
PROHEAT pads consume less electricity than frost plug/block heater counterparts. Frost plug/block heaters take hours to install with a variety of tools -- PROHEAT pads install in minutes without any tools and are permanent. A typical frost plug heater consumes 600watts while a 6.6l Duramax heater consumes 1000watts. Most applications can be covered by a Pro Heat Model # 512 that only consumes 250watts. PROHEAT pads are SMART, SIMPLE and COST-EFFECTIVE.

  • Unlike frost plug/block heaters, PROHEAT pads will not adversely affect newer car and light truck computer systems in cold weather.
  • PROHEAT heats the engine from the bottom up, starting with the oil.
  • Warm oil provides quicker lubrication to vital engine components reducing the need for costly, premature repairs.
  • Overnight use will warm the entire engine.
  • PROHEAT pads consume less electricity than frost plug/block heater counterparts.
  • Frost plug/block heaters take hours to install with a variety of tools -- PROHEAT pads install in minutes without any tools and are permanent.
  • PROHEAT pads are SMART, SIMPLE and COST-EFFECTIVE.

Advantages:

    
      Faster/easier engine cranking in cold weather
      Helps reduce engine wear with easy flow of engine oil Immediate engine oil pressure Easy installation
      Most efficient means of heat transfer available
      No cutting hoses, removing frost plugs, or loss of anti-freeze
      Heats 6 quarts of oil from -40 ºF to +60 ºF in less than two hours (based on 350 Chevy V8 & Model 512)
      Each model thermally balanced to meet your needs
      No danger of oil carbonization
      Permanent. Once applied, unit need not be removed


Item Name: Pro Heat Oil Pan Heater Model #1325
Category: Truck Accessories
Sub-Category: Oil Pan Heater
Price: $80.00

Model #1325 measures 5"x7"x.075" and consumes 500watts. It is best suited for larger capacity oiling systems holding 3-6 gallons. The Duramax oil pan does not have enough flat surface area to mount this unit.

PROHEAT pads consume less electricity than frost plug/block heater counterparts. Frost plug/block heaters take hours to install with a variety of tools -- PROHEAT pads install in minutes without any tools and are permanent. A typical frost plug heater consumes 600watts while a 6.6l Duramax heater consumes 1000watts. Most applications can be covered by a Pro Heat Model # 512 which only consumes 250watts. PROHEAT pads are SMART, SIMPLE and COST-EFFECTIVE.

"I'd rather start my engine with 60°f oil temp and a cold top end than a 60° top end and sub zero oil temp..." - JK