Welcome
Sign In
0

Pro Heat Oil Pan Heater Model # 512

Price: $65.00

Model #512 measures 3.5″x4.5″x.075″ and consumes 250watts of electricity. It is best suited for average capacity oiling systems holding 4-12 quarts. Heaters are best matched to vehicle by sump capacity, and available flat area to mount the pad to.

PROHEAT pads consume less electricity than frost plug/block heater counterparts. Frost plug/block heaters take hours to install with a variety of tools — PROHEAT pads install in minutes without any tools and are permanent. A typical frost plug heater consumes 600watts while a 6.6l Duramax heater consumes 1000watts. Most applications can be covered by a Pro Heat Model # 512 which only consumes 250watts. PROHEAT pads are SMART, SIMPLE and COST-EFFECTIVE.

“I’d rather start my engine with 60°f oil temp and a cool top end than a 60° top end and sub zero oil temp…” – JK

Category: Truck Accessories
Sub-Category: Oil Pan Heater

SKU: #57
-
+

Description

Oil Pan Heaters

Pro Heat Pad

Pro Heat Pad Installed

Click here for a pictorial guide to a typical Duramax install

Why Pro Heat?

PROHEAT pads consume less electricity than frost plug/block heater counterparts. Frost plug/block heaters take hours to install with a variety of tools -- PROHEAT pads install in minutes without any tools and are permanent. A typical frost plug heater consumes 600watts while a 6.6l Duramax heater consumes 1000watts. Most applications can be covered by a Pro Heat Model # 512 that only consumes 250watts. PROHEAT pads are SMART, SIMPLE and COST-EFFECTIVE.

  • Unlike frost plug/block heaters, PROHEAT pads will not adversely affect newer car and light truck computer systems in cold weather.
  • PROHEAT heats the engine from the bottom up, starting with the oil.
  • Warm oil provides quicker lubrication to vital engine components reducing the need for costly, premature repairs.
  • Overnight use will warm the entire engine.
  • PROHEAT pads consume less electricity than frost plug/block heater counterparts.
  • Frost plug/block heaters take hours to install with a variety of tools -- PROHEAT pads install in minutes without any tools and are permanent.
  • PROHEAT pads are SMART, SIMPLE and COST-EFFECTIVE.

Advantages:

  • Faster/easier engine cranking in cold weather
  • Helps reduce engine wear with easy flow of engine oil Immediate engine oil pressure Easy installation
  • Most efficient means of heat transfer available
  • No cutting hoses, removing frost plugs, or loss of anti-freeze
  • Heats 6 quarts of oil from -40 ºF to +60 ºF in less than two hours (based on 350 Chevy V8 & Model 512)
  • Each model thermally balanced to meet your needs
  • No danger of oil carbonization
  • Permanent. Once applied, unit need not be removed